QDI P6I440EX/MATX EXCELLENT II, Manual

Page: 43 / 52

Chapter 3
3 -
13
F5 : Old Values (Shift) F2 : Color
Onboard Parallel Port : 378/IRQ7 F7 : Load Setup Default
Figure-8 Integrated Peripherals Menu
The following indicates the options of each item and describes their meaning.
Item Option Description
•
IDE HDD Block Mode Enabled
Allows IDE HDD read/write several sectors at
once.
Disabled IDE HDD only reads/writes a sector once.
•
IDE
Primary/Secondary
Master/Slave PIO
(UDMA)
Mode 0 - 4
Auto
Defines the IDE primary/secondary master/
slave PIO mode.
The IDE PIO mode is defined according to
auto - detect.
•
On-chip
Primary/Secondary
PCI IDE
Enabled
Disabled
On-chip primary/secondary PCI IDE port is
enabled.
On-chip primary/secondary PCI IDE port is
disabled.
•
USB Keyboard
Support Enabled
Disabled
USB Keyboard Support is Enabled.
USB Keyboard Support is Disabled.
•
Onboard FDC
Controller
Enabled
Disabled Onboard floppy disk controller is enabled.
Onboard floppy disk controller is disabled.
•
Onboard Serial Port
1/2
3F8/IRQ4,
2F8/IRQ3, Defines the onboard serial port address and
required interrupt number.
3E8/IRQ4,
2E8/IRQ3,
Disabled,
Onboard serial port is disabled.
Auto Sets the address and interrupt number
automatically.
•
UART Mode Select
Normal
ASKIR
IrDA
Defines UART2 as the standard serial port.
Supports SHARP ASK-IR protocol with
maximum band rate up to 57600bps.
Supports IrDA version 1.0 SIR protocol with
maximum band rate up to 115.2 kbps.
IrDA SIR
The system function is the same as in Sharp-IR
mode, but at 115.2K Baud.
•
Onboard Parallel Port
378/IRQ7,
278/IRQ5, Defines onboard parallel port address and IRQ
channel.
•
Parallel Port Mode
SPP Defines the parallel port mode as
EPP Standard Parallel Port (SPP), Enhanced
ECP, Parallel Port (EPP), or Extended
ECP+EPP Capabilities Port (ECP).
System Monitor
ROM PCI/ISA BIOS (2A69JQ1K)
SYSTEM MONITOR
AWARD SOFTWARE , INC.
Current CPU Temp.
: 35
°
C/95
°
F