QDI P6I440EX/MATX EXCELLENT II, Manual

Page: 33 / 52

Chapter 3
3 -
3
There are two ways to boot up the system:
I. When VGA is used as primary and monochrome is used as secondary, the
selection of the video type is “EGA/VGA” mode.
II. When monochrome is used as primary and VGA is used as secondary,
the selection of the video type is “Mono” mode.
EGA/ VGA Enhanced Graphics Adapter / Video Graphic Array. For EGA, VGA,
SEGA, SVGA, or PGA monitor adapters.
CGA 40 Color Graphic Adapter, powering up in 40 column mode.
CGA 80 Color Graphic Adapter, powering up in 80 column mode.
MONO Monochrome adapter, including high resolution monochrome adapters.
Halt On
This category determines whether or not the computer will stop if an error is
detected during powering up.
No errors The system boot will not stop for any error that may be
detected.
All errors Whenever the BIOS detects a non-fatal error, the system will
stop and you will be prompted.
All, But Keyboard The system boot will not stop for a keyboard error, but it will
stop for all the other errors.
All, But Diskette The system boot will not stop for a disk error; but it will stop for
all the other errors.
All, But Disk/Key The system boot will not stop for a keyboard or disk error, but it will
stop for all the other errors.
Memory
This category displays only which is determined by POST (Power On Self Test) of
the BIOS.
Base Memory The POST of the BIOS will determine the amount of base
(or conventional) memory installed in the system.
Extended Memory The BIOS determines how much extended memory is
presented during the POST.
Other Memory This is the memory that can be used for different
applications. Shadow RAM is generally used in this field.
Total Memory Total memory of the system equals the sum of the above
memory.
SpeedEasy CPU Setup
ROM PCI/ISA BIOS(2A69JQ1K)
SpeedEasy CPU SETUP
QDI Innovative Technology