QDI P6I440EX/MATX EXCELLENT II, Manual

Page: 27 / 52

Chapter 2
2 - 3
CHSFAN JP13 (IrDA)
Hardware Green Connector (SLEEP)
SETTING FUNCTION
CLOSE ONCE HARDWARE GREEN
OPEN NORMAL
Infrared Header (JP13)
PIN NUMBER FUNCTION
1 VCC
2 NC
3 IRRX
4 GND
5 IRTX
6 VCC
Fan Connector(CPUFAN, CHSFAN, PSFAN)
PIN NAME FUNCTION
- GND
+ +12V
S Signal
These three fans are controllable. They will be automatically turned off after the system enters the
suspend mode. About PSFAN, please refer to the optional 6-pin power connector described above.
Wake-Up On LAN ( WOL)
PIN NUMBER FUNCTION
1 +5V Standby
2 GND
3 Signal for waking up (active high)
If the Wake-Up On LAN function is to be used, please connect this header to a LAN adapter, set
“Resume by LAN/Ring” to Enabled at the “POWER MANAGEMENT SETUP” in BIOS setup, then
boot to operating system once, making sure this function takes effect.
Wake-Up On Internal Modem ( WOM)
PIN NUMBER FUNCTION
GREEN_LED SLEEP
CPUFAN
PSFAN