QDI P6I440EX/MATX EXCELLENT II, Manual

Page: 24 / 52

Introduction
1 - 2
On-board I/O
•
Use Winbond W83977 Super I/O chip.
•
One floppy port supporting up to two 3.5”or 5.25” floppy drives with
360K/720K/1.2M/1.44M/2.88M format.
•
Supports LS-120 floppy disk drive.
•
All I/O ports can be enabled/disabled by the BIOS setup.
•
Two high speed 16550 fast compatible UART. (COM1/COM2/COM3 /COM4
selective) with 16-byte send/receive FIFOs and supported MIDI mode.
•
One enabled parallel port at the I/O address 378H/278H/3BCH with additional
bi-direction I/O capability and multi-mode (SPP/EPP/ECP) (IEEE1284
compliant).
•
Circuit protection provided£¬preventing damage to the parallel port when a
connected printer is powered up or operates at a higher voltage.
Advanced Features
•
On board W83781D supports system monitoring(monitors system voltages,
chassis intrusion and FAN speed) (Optional).
•
Supports LDCM( LanDesk Client Manager) software (Optional).
•
On board PS/2 mouse and PS/2 keyboard ports.
•
Two USB ports.
•
On board switching voltage regulator with VID (support from 1.3V to 3.5V).
•
Provides Anti-Virus function.
•
Provides Infrared interface.
•
Supports Windows 95 Software Power-Down.
•
Supports External Modem Ring Power-On.
•
Supports the wake up on LAN and wake up on internal modem function.
•
Supports Auto Fan off when the system enters suspend mode.
BIOS
•
Licensed advanced AWARD BIOS, Supports Flash ROM BIOS, Plug and
play ready.
•
Supports IDE CD-ROM or SCSI boot up.
Expansion slots
•
2 ISA slots and 2 PCI slots.
•
1 AGP Slot.