QDI Legend-III P6I440LX/AV, Manual, Page: 43 / 75

Chapter 3
3-
11
IRQ 8 Break Suspend :Disabled
F5: Old Values (Shift)F2: Color
F7: Load Setup Defaults
Figure-6 Power Management Setup Menu
The following pages tell you the options of each item and describe the
meanings of each option.
Item Option Description
•
Power
Management
Disabled
User Define
Global Power Management (PM) will be
disabled.
Users can configure their own Power
Management Timer.
Min Saving Pre - defined timer value are used such that all
timers are in their MAX values
Max Saving
Pre - defined timer value are used such that all
timers are in their MIN value
•
PM Control
by APM
No System BIOS will ignore APM when Power
Management is enabled.
Yes System BIOS will wait for APM’s prompt before
it enters any PM mode e.g. Standby or Suspend.
Note: If APM is installed, and if there is a task
running, even the timer is time out, the APM
will not prompt the BIOS to put the system
into any power saving mode. But if APM is not
installed, this option has no effect.
•
Video Off
Method
Blank Screen
The system BIOS will only blank off the screen
when disabling video.
V / H SYNC +
Blank In addition to Blank Screen, BIOS will also turn
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
DPMS This function is enabled only for the VGA card
supporting DPMS.
Note: Green monitors detect the V/H-SYNC
signals to turn off its electron gun .
•
Video Off After N/A System BIOS will never turn off the screen.
Suspend Screen off after system enters into Suspend mode.
Standby
Screen off after system enters into Standby mode.
Doze
Screen off after system enters into Doze mode.