QDI Legend-III P6I440LX/AV, Manual, Page: 39 / 75

Chapter 3
3-
7
Numlock Status
Off
Keypad is used as arrow keys.
•
Gate A20
Option
Normal
The A20 signal is controlled by keyboard controller
or chipset hardware.
Fast It is default. The A20 signal is controlled by Port 92
or chipset specific method.
•
Typematic Rate
Setting
Enabled Enable typematic rate and typematic delay
programming.
Disabled Disable typematic rate and typematic delay
programming. The system BIOS will use default
value of these two items.
•
Typematic Rate
Chars/Sec)
6
~
30 Set the speed of the typematic rate (characters per
second).
•
Typematic
Delay (Msec)
250 ~ 1000 Set the time of the typematic delay.
•
Security Option
System
The system will not boot and access to Setup will be
denied if the correct password is not entered when
prompting.
Setup The system will boot up, but access to Setup will be
denied if the correct password is not entered when
prompting.
•
PCI/VGA
Enabled Enable PCI/VGA palette snoop.
Palette Snoop
•
Assign IRQ for
VGA
Disabled
Enabled
Disabled
Disable PCI/VGA palette snoop.
AGP VGA shares the same IRQ resource with PCI1
slot. If you have to reserve IRQ for PCI1 slot, you
could disable VGA IRQ. In most cases, VGA IRQ is
not necessary.
•
OS Select For
DRAM>64MB
Non-OS2 If your operating system is not OS/2, please select
this item.
OS2
If system DRAM is more than 64MB and operating
system is OS/2, please select this item.
•
Video BIOS
Shadow
Enabled Video BIOS will be copied to RAM. Video Shadow
will increase the video speed.
Disabled Video shadow is disabled.
•
C8000
~
CBFFF
Shadow ...
DC000-DFFFF
Shadow:
Enabled
Disabled
Optional ROM will be copied to RAM by 16K bytes
per unit.
The shadow function is disabled.
•
Delay For HDD
(Secs):
0
∼
15
Set the predelay time for hard disk to be ready to be
accessed by the system.
Chipset Features Setup
ROM PCI/ISA BIOS (2A69JQ1B)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Auto Configuration : Enabled SDRAM CAS latency Time : 3
DRAM Timing : 60ns
MA WAIT State : Slow