Pi HSC816 Installation Manual - Revision Beta
This document and product are copyrighted and all rights are reserved.
23
QUESTION 84:
Trigger polarity on power up
Location 1 = Trigger polarity
Location 2 = Reserved
Location 3: = Reserved
Location 4 = Reserved.
Location 1:
Select as positive on power-up to give a negative switch on trigger
Set to +12v
Prog Value
Trigger 4
Trigger 3
Trigger 2
Trigger 1
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
QUESTION 85 to 87:
Reserved
QUESTION 88 to 93:
Primary telephone number 1
(24 digits available)
QUESTION 94 to 99:
Secondary telephone number 1
(24 digits available)
QUESTION 100 to 108:
Reserved
QUESTION 109:
Auto arm type
QUESTION 110:
Auto arm time
(End user programmable)
Location 1 = Hours x 10
Location 2 = Hours x 1
Location 3 = Minutes x 10
Location 4 = Minutes x 1
QUESTION 125 to 149:
Hardwired triggers
Location 1 = Digit 1 of trigger
Location 2 = Digit 2 of trigger
Location 3 = Trigger number
Location 4 = Trigger action
QUESTION 150 to 164:
Wireless triggers
Location 1 = Digit 1 of trigger
Location 2 = Digit 2 of trigger
Location 3 = Trigger number
Location 4 = Trigger action
Special note: When using wireless triggers, the trigger will only transmit for 2 seconds.
Location 4 will determine if the trigger switches again at the end of the selected trigger timer.
Location 4 as a 0 means no second transmission.
Location 4 as 1 to A means that the selected trigger will switch at the end of the trigger timeout.
0
Normal away mode
1
Home 1
2
Home 2
3
Away instant
