14
AS65 Conveyors | Installation & Maintenance Instructions
u
Installation of New Belt
1
Loop belt over tension release
tail end.
2
Slide belt onto idler end of
conveyor.
3
Slide idler pulley into slot
above motor, pushing the
belt up and into position. (Ensure
recess in shaft is pointed away from
mounting package)
4
Tighten adjustment screws
until pulley creates tension
on belt and marks are aligned.
2
x
5
Slide other idler pulley into
opposite slot above drive
pulley, pushing the belt up and into
position. (Ensure recess in shaft
is pointed away from mounting
package)
6
Tighten adjustment screws
until pulley creates tension on
belt and marks are aligned.
7
Replace guard.
8
Replace and tighten both
screws holding guard above
motor.
4
x
2
x
2
x
9
Replace and tighten four
screws holding guard on
opposite side.
10
Slide mounting brackets
into place.
11
Insert screws through
bracket and into drop in
nuts in frame.
12
Tighten screws holding
bracket to conveyor frame.
