19
15 luglio 2019
5
Installation
# Example Installation
Following this very basic installation steps you can build the example code
from scratch and test the qb SoftHand Industry functionalities.
mkdir build
cd build
cmake ..
make
make install
The example code is stored under the
src
directory (it is called
main.cpp
as
usual).
The
building
process
generates
an
executable
called
qbsofthand_industry_api_example
in the base directory, that can be run in
any terminal.
The example prompt on screen the qb SoftHand Industry information and
close (and reopen) it just one time.
Before executing the example code, please be sure to have properly
connected and powered the device by following the official qb SoftHand
Industry User Guide.
Moreover, you need to be connected to the device through a proper
ethernet network. The device default parameters are the followings so
please set up your network adapter settings to fit this configuration (you may
change the device network parameters later).
* Network IPv4:
192.168.1.110
* Network Mask:
255.255.255.0
* Network Gateway:
192.168.1.1
* Network DHCP:
disabled
For example, you may give the
192.168.1.100
static IPv4 to your network
adapter.
