14
15 luglio 2019
4.2.3
Connection sequence
#
instructions
1
Assembly the motor phases of
the main cable to the 4-pin
connector for the port 7; block
the cables turning clockwise
the two screws.
Make sure to connect the red
cable to the
M2
pin and the
blue cable to the
M3
pin.
WARNING
:
Pay attention to connect
cables in the correct
way.
You
need
the
flathead
screwdriver.
2
Assembly the main cable to
the external driver.
Connect the 12-pin Molex
plug to the port
4
and the 4-
pin connector to the port
7
.
3
Connect the STO plug to the
external driver port
1.
