8/16 Channel Digital Video Recorder
48
disks is displayed.
HDD SIZE:
Size of the Hard Disk
HDD USED:
Used Space of the Hard Disk.
HDD READ:
Current HDD Address for Playback
OVERWRITE:
Overwrite Time of the HDD
NETWORK IP:
IP address of the DVR.
REC LIST:
Number of screen pages in the Record Search listings for MASTER and SLAVE disks
EVENT LIST:
Number of screen pages in the Event Search listings for MASTER and SLAVE disks
REC OVER:
Record List overwrite or not
EVENT OVER:
Event List overwrite or not.
S/W VER:
Software Version
14. Pan-Tilt-Zoom (PTZ) Operation
(Requires technical expertise for initial setup)
The DVR can control all “speed dome” operations for cameras that are connected to the DVR.
To control the speed dome, ensure that all the lines are properly connected and that the right protocol,
baud rate, and speed dome’s address for each speed dome camera has been input. Refer to Protocol
Set in the SYSTEM SETUP section of this manual. For example, if the first speed dome camera is
connected to channel one, you should make sure that the baud rate, the protocol, and speed dome’s
address is the same as that of the speed dome camera connected to that channel. Also refer to the
setup and operations manual for the speed dome cameras.
PTZ can only be operated by the remote control. Press the PTZ button on the remote control and
“PTZ” will be displayed on the screen. Select 1 to 16 to choose the PTZ channel and the channel
number will be displayed besides “PTZ”. The PTZ Screen for CH01 is illustrated below:
