3
Assembly and installation manual
QIM/QDB Mixer Series
QIM/QDB-M01
ABOUT THIS MANUAL
To ensure the best performance of your pump, please read this manual before starting it. You will
find useful information and instructions for the assembly and disassembly procedures required for the
necessary pump maintenance.
For any questions related to the operation, maintenance or installation, please contact your local
distributor or directly to Q-Pumps:
Q-Pumps S.A. de C.V.
Acceso “A” #103, Fracc. Industrial Jurica
Querétaro, Qro., México, 76130
Call: +52 (442) 218 4570 y +52 (442) 103 3100
Fax: +52 (442) 218 4577
E-mail: [email protected]
Web: www.qpumps.com
The information in this manual might change without notice, we recommend to visit our website for any
updates.
Q-Pumps S.A. de C.V. Warranty
Q-Pumps guarantees that all manufactured and sold products are free from defects in materials and
manufacture for a period of one (1) year from the date of shipment. The warranty does not apply to products
which require repair or replacement due to what is considered normal wear. Conditions caused by normal
wear include (but are not limited to standard rotors wear) casing, mechanical seals, gears and bearings wear.
Accidents, operating errors or improper maintenance are not covered by the warranty. Q-Pumps
assumes no liability for incidental, accidental or consequential damages. The purchaser by acceptance
of delivery assumes all liability for the consequences of use or misuse by it, its employees or third parties.
Unless they are approved in advance, Q-Pumps does not assume any costs related to parts and / or
service.
Q-Pumps disclaims any responsibility for modifications or conversions to the pump and the system. For
security reasons and functionality use original parts only. The use of other parts voids the warranty and
excludes liability for any consequences.
The pump is designed only for pumping fluids under established characteristics in the selection sheet. Any
other use besides the intended one without the prior written consent of the manufacturer’s application,
will result in disclaim of any responsibility from Q-Pumps.
If the pump is stored temporarily or indefinitely, avoid weather exposure and protect the connection
ports with plastic plugs supplied with your pump. Turn the pump shaft by hand every two months to
change the rotating position of the bearings.
AB
O
U
T
T
H
IS
MAN
U
AL
