background image

12

13

INSTALLATION AND OPERATION MANUAL B.LINE SOLAR MODULES G4 – HANWHA Q CELLS – EN

INSTALLATION AND OPERATION MANUAL B.LINE SOLAR MODULES G4 – HANWHA Q CELLS – EN

12

13

DANGER

! Risk of fatal injury due to electric 

shock! 

 

Ä

Block off the installation zone.

 

Ä

Keep children and unauthorized 
individuals away from the solar power 
system.

DANGER

! Risk of fatal injury due to electric 

shock! 

 

Ä

Ensure that modules and tools are not 
subject to moisture or rain at any time 
during installation.

WARNING

! Risk of injury due to falling mod-

ules!  

 

Ä

Secure modules during installation. 

 

Ä

Do not install modules in windy or wet 
weather. 

DANGER

! Risk of fatal injury due to electric 

shock! 

 

Ä

Only use dry, insulated tools. 

 

Ä

Do not carry out the installation alone.

• 

Only install undamaged modules and  
components.

 

Ä

Do not modify the module (e.g. do not 
drill any additional holes).

3.2  Preparation of installation

3 INSTALLATION

NOTE

! Module damage may occur!

 

Ä

Never lift or move the module with the 
connection cables or junction box.

 

Ä

Carry modules upright and horizontally 
as shown.

NOTE

! Module damage may occur!

 

Ä

Never step on modules.

 

Ä

Do not subject modules to any 
mechanical stress.

 

Ä

Do not allow any objects to fall onto 
modules

NOTE

! Module damage may occur!

 

Ä

Do not drop modules.

NOTE

! Module damage may occur!

 

Ä

Only make modifications to the module 
which have been confirmed in writing by 

Q CELLS.

confirmation
letter

NOTE

! Module damage may occur!

 

Ä

Do not stack modules.

NOTE

! Module damage may occur!

 

Ä

Do not install modules near flammable 

gas / vapors.

 

Ä

Do not install modules in close proximity 
to air conditioning systems.

3.1  Safety and transport

3 INSTALLATION

Summary of Contents for B.LINE G4













Reviews: