9
PROGRAMMING
9.1
Factory defaults.
User code 1
:
1234 (programmable 0000 to 9999).
User code 2 If enabled
:
5678 (programmable 0000 to 9999) .
Cleaner Code
If enabled
:
7890 (programmable 0000 to 9999).
Engineer code
:
9999 (programmable 0000 to 9999).
Bell timer
:
20 minutes (programmable 0 to 20 mins).
Entry time
:
30 seconds (programmable 0 to 99 secs).
Exit time
:
30 seconds (programmable 0 to 99 secs).
The following key shows possible zone configurations-
E =
Entry/exit zone
S =
Soak zone
i =
Immediate zone
c =
Cleaner zone
A =
Access zone
n =
Non-omit zone
O =
Omitted zone
F =
Fire zone
H =
24 Hour zone
The zone types are factory set as follows: Zone number
1 2
3
4 5 6 7
8
Full set
E A i
i
i i i
i
Part set A
E A i
i
i i i
i
Part set B
E A i
i
i i i
i
Part set C
E A i
i
i i i
i
9.2
User and Engineer Codes.
9.2.1
Entering and exiting the Engineer mode.
With the control panel in day mode enter the Engineer code
.
A
will be displayed on the remote keypad(s) when the Octagon II is in Engineer Mode. Any covers may now be
removed
without creating a tamper alarm and access is now given to the programming functions of the control panel.
To exit Engineer mode enter
. This will return the control panel to day mode.
9.2.2
Enabling the Limited User (user 2) code.
To enable the Limited user code first enter Engineer mode as above then
enter
followed by
to enable.
To disable the Limited user code
enter
followed by
. The default Limited user code is
.
9.2.3
Enabling the Cleaner code.
In Engineer mode enter
followed by
to enable, or
followed by
to disable the cleaner code.
The default cleaner code is
.
9.2.4
Changing the Engineer code.
In Engineer mode enter
followed by your new Engineer code
twice
Your new code may be any 4 digit number from
to
.
14
All manuals and user guides at all-guides.com