9
General ON/OFF button (1)
•
If all the SLEDs are OFF, the general ON/OFF button will be OFF (grey). By
pressing it, the general button changes to the ON state (light green) and all the
SLEDs will be turned ON with the 100% of its power.
•
If one or more SLEDs are ON, whatever the output power, the general ON/OFF
button will be ON (light green). By pressing it, the general button changes to
the OFF state (grey) and all the SLEDs will be turned OFF.
SLEDs section
Each SLED contained in the FJORD light source possesses a small rectangle (2)
in the initial screen with its name (3), the percentage of the nominal output power
(4) and a status circle (5) on the upper right corner of the rectangle. To access to
more detailed information about the SLED (see Figure 2 on the next page), please
touch the rectangle.
The status circle can have the following colours:
•
Green: the SLED is operating correctly and its temperature has achieved the
value set as reference. See the first SLED on the left on Figure 1.
•
Yellow: the SLED temperature hasn’t achieved yet the value set as reference.
Observe the second SLED starting from the left on Figure 1.
•
Red: an error has occurred. In this case, a warning symbol (6) will appear in the
rectangle of the corresponding SLED. The warning won’t disappear until the
error has been solved (green or yellow circle) and we have accessed to the
screen of the corresponding SLED. See the third SLED starting from the left on
Figure 1.
These colours will be lighter if the SLED is ON and darker if the SLED is OFF.
1
2
3
4
1
General ON/OFF button
2
SLED rectangle
3
SLED name
4
% of nominal P
OUT
5
Status circle
6
Warning
Figure 1. Initial screen
2.5 Touch screen (available extra)
2.5.1 Initial screen
5
6
SI Scientific Instruments GmbH
Roemerstr. 67 | 82205 Gilching
+49 8105 77940 | [email protected] | www.si-gmbh.de | Follow us on:
