13
2.6.2 App: Control and monitoring
Once the connection has been made, the drop-down menu that allows you to
choose the desired SLED and the widgets that let you control the output power
will be active. The connection between the computer and the FJORD light source
can be closed at any time by clicking on “Disconnect” (5).
•
In the drop-down menu (6) we can select each SLED that is in the light source.
•
For the selected SLED, the temperature in ºC is shown (7). This value is
updated every second.
•
The output power of the selected SLED can be varied from 0 to 100 % by
using the slide bar (8) or by directly introducing the desired value in the
regulator (9). The arrows permit to increase/decrease this value by 1% (10).
•
After each change, the button “SET POWER” (11) has to be pressed to update
the new value of the output power of the corresponding SLED in the FJORD
light source.
Figure 7. Main window of the FJORD app. Control and monitoring
6
6
5
7
8
9
10
11
SI Scientific Instruments GmbH
Roemerstr. 67 | 82205 Gilching
+49 8105 77940 | [email protected] | www.si-gmbh.de | Follow us on:
