6
Optical characteristics
The available SLED for configuring your own FJORD source are the following:
The central wavelength of each SLED is included in its own name. For example,
SLED HP1130 has a central wavelength of 1130 nm.
The power measurements shown in the graph correspond to each individual
SLED. The assembly of several SLED modules implies some power losses. Final power
measurements will be provided for each FJORD SLED light source separately at the
time of assembly.
Right now, we have available the FJORD configuration tool, that allows you to
combine up to 8 SLED to preview your desired output spectrum. Contact us through
[email protected] in order to get access to it or download it in our webpage.
Electrical characteristics
• Input voltage (V
IN
): 5 V
• Input current (I
IN
): 4 A max
(typical value, it may vary depending
on the model)
• Connector type: DC female 2.1 mm
Other characteristics
• Working Temperature: 15 - 25ºC
• Relative Humidity: 20 - 80% HR
SI Scientific Instruments GmbH
Roemerstr. 67 | 82205 Gilching
+49 8105 77940 | [email protected] | www.si-gmbh.de | Follow us on:
