2. Operation
2.1 Package Content
•
Requested FJORD light source
•
Power source
•
Power cord
•
User’s manual
Inspect carefully the devices and make sure there is no damage. On the contrary, do
not employ the light source and please contact us through [email protected] for
repair or replacement information.
2.2 Basic operation
Insert the plug of the power cord into the power supply and connect the power
cord to the power outlet. Then, introduce the plug of the power supply into the light
source power input (DC female type).
Unscrew the cap of the FC-PC/FC-APC connector on the front face of the light
source and connect the fiber cable. Always do this step before turning on the light
source. Now, the FJORD light source is ready to be used.
Press the ON/OFF button to turn on the light source. The button will be lit up in
green while the source is working. Press again the button to turn off the light source.
USB connection
If your FJORD source has a USB connection (available extra) and you want to use
it, physically connect the source to the computer through the USB cable. If your
FJORD source has a touch screen (available extra), the message “USB Connected”
will appear on it once you have done the connection.
In order to end the USB connection, just disconnect the USB cable. If you are
using the app for the USB connection, it is recommended to click on “Disconnect”
in the first place (more information on section 2.6.2).
2.3 Maintenance
The output connector of the light source should be periodically cleaned employing
compressed air to remove the dust. It is recommended to have the output connector
with the cap on it whenever the light source is not being used. The connector of the
fiber used with the light source also has to be clean to ensure the best possible
performance.
7
SI Scientific Instruments GmbH
Roemerstr. 67 | 82205 Gilching
+49 8105 77940 | [email protected] | www.si-gmbh.de | Follow us on:
