Copyright Pyroban Ltd. Issue 1 Page 16 of 32
Part number PM1083ENG
Preparation
Check the kit of parts supplied against the packing list in kit list:
Study the installation diagram with a view to siting the new Gascheka duo components and
cable runs on the vehicle.
The following cables carry incendive voltages and currents and
MUST
be routed within the
confines of the vehicle or mechanically protected from impact to prevent an ignition hazard.
•
Power supply cable
•
Cable from Relay Unit to Control Unit
The remaining of the cable is non-incendive but should be routed within the confines of the
vehicle or mechanically protected to give reliable long term operation.
•
Control Unit to Gas Sensing Head
Battery
Disconnect battery in accordance with vehicle manufacturer’s instructions prior to any
installation work taking place.
Recommended Tools Required for Installation:
Digital Voltmeter
Tap wrench
Taps 4mm, 5mm & 8mm
Drill to suit
Battery Powered Drill
Spanners - 8,10,13,17 & 19mm
Gas bottle regulator spanner
Hole cutter for Isolator Switch
Metric Allen Keys (2.5mm & 3mm)
Wire strippers
Wire Cutters
Crimp tool (Press Master RS 533-279)
Terminal screwdriver
