Pyramis Kochfeld 58HL 4003, Use And Installation Manual

Page: 10 / 24

10
• TOUCH CONTROL
(Fig. 8)
0. 0 0.
0.
0.
0.
A
F E
B C D
1
E E D
3
D
2
A
*
E D
4
A. On/Off
key
A*.
On/Off LED indicator
B. [+]
key (increase)
C. [-]
key (decrease)
D. Zone Selection
key
E.
Cooking zone Display
F.
Timer Display
• SWITCHING THE APPLIANCE ON
Press the
On-Off
key to switch the hob
on. All the cooking zones displays switch
on in the «
0
» standby position.
The control
unit remains active for 20 seconds.
If no
cooking zone is selected within this time, the
appliance switches off automatically.
• SWITCHING A COOKING ZONE ON
Select the desired cooking zone by pressing
the
Zone Selection
key . The display of the
active zone will show «
0
». Adjust the desired
cooking level using the
[+]
and
[-]
keys within
10 seconds. Press the
Zone Selection
key
to confirm the setting. The power of the single
cooking zone can be adjusted in
9
different
positions and will be shown on the relative
luminous display with a level from «
1
» to «
9
».
• RESIDUAL HEAT
«
H
»
If the temperature of the cooking zone is still
high (over
50°
) after it has been switched off,
the relative display will indicate the «
H
» symbol
(residual heat). The symbol will only switch off
when the burn risk in no longer present.
• AUTOMATIC PRE-HEATING
«
A
»
This function determines a pre-heating of the
cooking zone at maximum power in order to
take it to the working temperature quickly.
To activate this function select the desired
cooking zone by pressing the corresponding
Zone Selection key
then press the [-] key
in order to set the power level to «
9
», then
press the
[+] key
once until the symbol «
A
»
lights up on the display. Adjust the cooking
power by acting on the
[-] key.
The display
will alternatively show the automatic pre-
heating symbol «
A
» and the set power level.
At the end of the pre-heating phase the
cooking zone will automatically set itself at
the set power level.
• WARMING FUNCTION
«
u
»
This function sets the heat temperature of the
selected cooking zone at
42°C
to keep food
warm. Once the cooking zone is started,
press the
[+] key
and select value «
1
» then
press the
[-] key
. The symbol «
u
» will appear
on the cooking zone display, meaning that
the warming function is activated.
• TIMER
This function allows you to set the time from
«
01
» (1 minute) to «
99
» (99 minutes) for the
automatic switch off of a cooking zone.
Select a cooking zone by pressing the
corresponding
Zone Selection key
and
adjust the heat level. Press simultaneously the
[+]
and
[-] keys
to activate the Timer display.
Set the desired time within 10 seconds
using the
[+]
and
[-] keys
. Press the
Zone
Selection
key to confirm the setting or wait
10 seconds for the automatic confirmation.
The time countdown will be shown on the
timer display.
When time elapses the cooking zone will
automatically switch off, the display will show
a flashing «
00
» and an acoustic signal will be
heard. Press any
key
on the control panel to
stop the signals.
To disable the timer of a cooking zone press
the corresponding
Zone Selection key
then
press simoultaneously the
[+]
and
[-] keys
to turn on the Timer display. Bring the timer
value back to «
00
» by using the
[-] key.
Wait
10 seconds for the automatic confirmation.
The led on the display of the cooking zone
stops flashing.