Pyramis 201045, Installation & Operating Instructions Manual

Page: 29 / 340

29
4
PROGRAMMABLE OPTIONS
1- Time of day display 12h / 24h
Factory setting is 24 h display. Touching for 5 seconds, a double beep
tone will be heard, the display mode toggles to 12 h mode (am / pm
indication) Doing this again will toggle back to 24 h
2- Touch tones
As a factory setting, touching buttons are accompanied by beep tones.
Touching the button for 5 seconds, a double beep tone will be heard
and nt , which stays for no tone, will appear on the screen. Now, no touch
tones will be heard any more. Doing the same until bt appears on the
screen, which stays for button tone, brings you back to touch tones.
3- Screen Brightness Adjustment
Touching button for 1 second, until you hear a double beep tone, brings
you into the display brightness mode. Display shows br 0x (x = 1 to 8). Now
every consecutive touch of the same button will reduce the brightness.
There are 8 levels, thereafter the brightness starts to increase upon every
touch. The same effect is also seen by holding this button touched. In 5
seconds after releasing the button, the brightness level will be stored.
Factory setting is maximum brightness.
4- Buzzer Tone Selection
Touch button for 1 second, until you hear a double beep tone. Upon
every touch of this button within 5 seconds, you will hear a different tone.
There are 3 different tones available. The tone last heard will be stored in
5 seconds.
Note: Programmed options are nonvolatile. They will not be erased upon a
power interrupt.
FACTORY SETTINGS
Buzzer: Highest sound tone
Brightness: Highest level
Beep tone: Active
Clock mode: 24 hours
5
4
PROGRAMMABLE OPTIONS
1- Time of day display 12h / 24h
Factory setting is 24 h display. Touching for 5 seconds, a double beep
tone will be heard, the display mode toggles to 12 h mode (am / pm
indication) Doing this again will toggle back to 24 h
2- Touch tones
As a factory setting, touching buttons are accompanied by beep tones.
Touching the button for 5 seconds, a double beep tone will be heard
and nt , which stays for no tone, will appear on the screen. Now, no touch
tones will be heard any more. Doing the same until bt appears on the
screen, which stays for button tone, brings you back to touch tones.
3- Screen Brightness Adjustment
Touching button for 1 second, until you hear a double beep tone, brings
you into the display brightness mode. Display shows br 0x (x = 1 to 8). Now
every consecutive touch of the same button will reduce the brightness.
There are 8 levels, thereafter the brightness starts to increase upon every
touch. The same effect is also seen by holding this button touched. In 5
seconds after releasing the button, the brightness level will be stored.
Factory setting is maximum brightness.
4- Buzzer Tone Selection
Touch button for 1 second, until you hear a double beep tone. Upon
every touch of this button within 5 seconds, you will hear a different tone.
There are 3 different tones available. The tone last heard will be stored in
5 seconds.
Note: Programmed options are nonvolatile. They will not be erased upon a
power interrupt.
FACTORY SETTINGS
Buzzer: Highest sound tone
Brightness: Highest level
Beep tone: Active
Clock mode: 24 hours
5
* COOKING WITH MEAT PROBE
Meat probe is a sensor, connected to plug inside the oven and inserted into the
meat to be cooked. Using the meat probe, cooking is automatically ended when
the meat reaches the desired temperature.
* Optional feature.
1) Touch button. symbol will flash on the right side of the screen.
2) The actual meat temperature is displayed on the left, the adjusted end
temperature on the right portion. Default adjusted end temperature is 80 ºC.
3) Adjust the desired meat temperature at cooking end in the range ‘actual meat
probe temp2 ºC’ between 20 ºC and 90 ºC using and buttons.
Note: Meat probe socket of the probe is pulled out of the cooking is completed, the
finished cooking, such as an alarm. Ended before the heat of cooking, which is set to
the left of the screen, expressed interest ''Er'' icon. In this case, use the Manual Fashion
passing the oven.
IN CASE MOINS POWER LOSS
If the mains power failure, the oven will be disabled in the emer-gency. This
condition is expressed by a flashing on-screen time, and the AUTO script. This
position will be deleted from the force if there is a cooking program. 0 00 is
displayed on-screen clock, the clock will need to be set. (See Time of Day
Setting)
Note: You do not operate your oven; do not forget to turn off the switch on the oven.
KEY LOCK
When activated in manual mode, your oven and the timer keys are blocked.
When activated as a cooking program is in progress, just the keys are blocked.
1) Touch and at the same time 2) The key symbol appears on the
for 1 seconds until 2 beep tones heard. Screen, key lock is active .
To deactivate the key lock, touch and until key symbol disappears.
Note: A buzzer tone during key lock can be cancelled by touching any button.