Opration Setting
Direct Power On
•
On: The projector will turn on in 3 seconds.
•
Off: The projector will turn on following normal power on procedure.
Auto Power Off
Allows the projector to turn off automatically if no input signal is detected after a set
period of time.
Sleep Timer
No matter whether the projector detect signal or not, the projector will turn off
automatically when the countdown has finished.
SYSTEM SETUP:Advanced
High Altitude
Use this function to allow the fans operates at full speed continuously to achieve
proper high altitude cooling of the projector.
Lamp Setting
Allow you to enter the Lamp Setting menu.
•
Lamp Hours: Display the lamp’s elapsed operating time (in hours).
•
Lamp Hours Reset: Reset the lamp Hour to 0 hours.
Lamp Mode
Normal: 100% lamp brightness.
Economic: Saves 20% lamp power consumption.
SmartEco: Saves up to 70% lamp power consumption depending on the content
brightness level.
•
•
•
Closed Caption
Enable or disable closed captions by selecting CC1 (closed caption1, the most
common channel), CC2, CC3, CC4, T1, T2 or OFF.
Reset all settings
Restore settings to factory default.
•
Source
•
Picture Mode
•
Resolution
•
Lamp Mode
•
3D Format
•
Color System
•
Equivalent Lamp
•
Firmware Version
Current System Status
INFORMATION
EN-28
•
Menu Position: Choose the menu location on the display screen.
•
Menu Display Time: Duration of OSD menu display countly starts (at idle state by
second).
Summary of Contents for PRJLEDLP205
Page 1: ...DIGITAL PROJECTOR INSTRUCTION MANUAL Model PRJLEDLP205 ...
Page 41: ......
