Pyle PRJLEDLP205 Instruction Manual Download Page 6

Page: 6 / 41

Introduction

Projector

The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:

•

Single chip 0.55" Texas Instruments DLP technology

•

XGA (1024 x 768 pixels)

•

Compatibility with Macintosh computers

•

Compatibility with NTSC, PAL, SECAM and HDTV

•

D-Sub 15-pin terminal for analog video connectivity

•

User-friendly, multi-language on-screen display

•

Advanced electronic keystone correction

•

RS-232 connector for serial control

•

Less than 0.5 W power consumption in standby mode

•

SmartEco?mode lowers the po wer consumption to increase the lamp life hours

Note

•

The information in this manual is subject to change without notices.

•

The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.

Features

EN-5

Summary of Contents for PRJLEDLP205










































Search results

Summary of Contents for PRJLEDLP205

Reviews:

Related manuals for PRJLEDLP205

Brands by name

Popular brands

Pyle PRJLEDLP205, Instruction Manual

Search results

Summary of Contents for PRJLEDLP205

Reviews:

Related manuals for PRJLEDLP205

Brands by name

Popular brands