Pyle PRJLEDLP205, Instruction Manual

Page: 26 / 41

EN-25
DISPLAY
Wall Corlor
Brighten or darken the image.
Aspect Ratio
Select how the picture fits on the screen:
• Auto : Scales an image proportionally to fit the projector's native resolution in its
horizontal or vertical width.
• 4:3 : Scales an image so that it is displayed in the center of the screen with a 4:3
aspect ratio.
• 16:9 : Scales an image so that it is displayed in the center of the screen with a 16:9
aspect ratio.
• 16:10: Scale an image so that it is displayed in the center of the screen with a 16:10
aspect ratio.
• Real: Minimizes the aspect ratio distortion by maintaining close to the original
aspect ratio in the center of the image and distributing the majority of distortion at
the edges of the displayed image.
Auto Keystone
Automatically correct distorted images resulting from an angled projection.
Keystone
Manually correct distorted images resulting from an angled projection.
Press Keystone / on the projector or remote control to display the Keystone
correction page.
Press to correct keystone at the top of the image.
Press to correct keystone at the bottom of the image.
Position
Adjust the image up or down or left or right within the projection area.
Phase
Adjust the phase of the projector relative to the computer.
Digital Zoom
Using the remote control
1. Press Magnify on the remote control to display the Zoom bar.
2. Press / to magnify the picture to a desired size.
3. Press “
Enter ” on the projector or remote control to switch to the paning mode and
press the directional arrows to navigate the picture. The zoom bar needed to be
shown on screen if we want to switch the paning mode.
4. To reduce size of the picture, press Magnify and press repeatedly until it is
restored to the original size.
Using the OSD menu
1. Press
Menu and then press until the Video/Audio menu is highlighted.
2. Press to highlight Zoom.
3. Repeat steps 2-4 in the section of Using the remote control above.