4.2 Connecting controller directly to the PC
When connecting the controller directly to a computer it is recommended
to use a braided cable. Newer network cards will work both on a braided cable
or a non-braided cable, but older ones may require a braided cable.
4.3 Connecting the controller using a router
When connecting the controller to the router, there are two options
for network settings. The first of these is the use router with a DHCP server
running, the network configuration on all devices in the network is set
automatically. The second option is to connect the controller and devices
cooperating with it to a switch or router that does not support DHCP server, in
this case all devices in the network must have manually configured network
settings in such a way that each device operates in the same network and has
a unique IP address.
12
REMOTE
10V
0-10V OUT
2
1
1
2
3
4
0-10V IN
1
1 2 3 4
6 7 8
5
10 11 12
9
14 15 16
13
SS
1
RX+ RX-
TX+ TX-
KBD
VCK+
EXT
SYNC
PC:
e.g:
IP:192.168.0.51
Mask: 255.255.255.0
PX345:
Default configuration:
IP:192.168.0.50
Mask: 255.255.255.0
DHCP (recommended)
¨
