6. DESIGNATION OF DISPLAYED MESSAGES
6
DMX address of a device - a basic item in the MENU
setting parameters for each channel individually
DMX address setting
control method selection (RGB, LIGHTNESS / COLOUR, etc.)
no DMX signal response method selection
MASTER / SLAVE mode settings
LIGHTNESS /COLOUR control mode
RGB control mode
HSL control mode - HUE / SATURATION / LIGHTNESS
effect control mode
setting parameters for all channels simultaneously
RGB Dimmer control mode
all outputs at 100%
all outputs off
5. CONNECTING DMX SIGNAL
PX184 must be connected to DMX line in series. This means that DMX IN terminals in the device
must be provided with the driving cable, and then from DMX OUT connector the driving cable
must be provided to other DMX receivers.
If PX184 is the last device in DMX line, DMX Out terminals must be provided with the terminator –
resistor of 120 Ω between pins “+” and “-”
DMX-512 input
DMX-512 output
DMX cable
120 Ω
NTC
1
2
