Programming in this menu applies to all channels. After selecting
ALL
in the main menu confirm
your selection by pressing the "enter" key, followed by "next" or "previous", and select the
parameters you want to set:
Adr
-
DMX address of the device,
Cbn
-
Selection of the control method,
noS
-
Response of the device to the fading of the DMX signal,
C_d
-
MASTER / SLAVE function,
bAL
-
White balance setting,
Sth
-
Transition smoothing between different values.
7. PROGRAMMING OF GROUP PARAMETERS
7.1.
Setting of DMX address
Menu of the PX184 driver allows for setting the DMX address of the device depending on the
mode of operation in the following range:
1 - 511 :
two-byte mode
2b
1 - 510 :
three-byte mode
3b
1 - 509 :
four-byte mode
3bd
1 - 510 :
HSL
mode
(
H
ue,
S
aturation,
L
ightness)
1 - 506 :
effect mode
EFF
For example,
for the
EFF
mode the module occupies seven consecutive DMX addresses; when
setting the address to 506, the last channel is occupied by address 512.
All channels line up one behind the other, and we select the first of these channels.
Each address programmed this way deletes previous individual settings of channels.
To set the DMX address:
1. Set the
Adr
function,
2. Using the "next" or "previous" buttons
set the selected DMX address,
3. Confirm your selection by pressing
"enter".
NEXT
ENTER
ENTER
ENTER
9
7.2
Operation mode
The PX184 driver can operate in the following modes:
EFF
,
HSL
, 4-channel, 3-channel or 2-
channel. A description of the EFF mode is shown on the next page.
