11
7.3 Response to the lack of DMX signal
This function is used to protect the installation against fading of the DMX signal, and to control the
LEDs without connecting an external controller. After it is activated, and if there is no DMX signal,
the module will execute the selected function independently. Reconnecting the DMX signal will
automatically stop the function being executed, and the module will again execute commands
transmitted via the DMX line.
ENTER
NEXT
NEXT
NEXT
ENTER
ENTER
NEXT
NEXT
NEXT
NEXT
NEXT
ENTER
2x
NEXT
You can also use the 18 preset
programs.
It is also possible to set the
playback speed and steps
change smoothness in the
program for each of them
t
o set the playback rate,
press "enter" in a tab of a
given programme. You will
be able to change the
SPd
value (possibly in the range
from 0.1 up to 99.9
seconds) after pressing
"enter" again.
on
stands for turning all the outputs on at
100 %,
oFF
turns all the outputs off
t
o independently
program the scene,
enter the Sc option,
and then set the
value at the red,
green and blue
channels, and specify
the scene input time
to
start the NO
SIGNAL
function, enter
the
noS
option
NEXT
NEXT
NEXT
scene input time – a value
between 0.1 and 99.9
seconds
step changing rate
The red channel (
rEd
), the green channel (
Grn
), and the blue channel (
bLu
) – the intensity of
each of them is controlled within the range of 0 - 255.
To change the step change rate, press "enter" on the tab of the selected program. Use the "next"
or "previous" buttons to set the
Fad
parameter. Then, press the "enter" button and enter the
chosen value between 0 (abrupt transition) to 100 (smooth transition).
To confirm the changes made in the "no DMX signal response" settings press the "enter" button.
CHANNEL1 - red colour
CHANNEL2 - green colour
CHANNEL3 - blue colour
CHANNEL4 - operating mode selection
CHANNEL5 - speed settings (higher value - quicker changes)
CHANNEL6 - fade settings (higher value - smoother transition)
CHANNEL7 - lightness settings (higher value - stronger glow)
- possibility to control a given parameter of a selected mode
character ("-")
- no possibility to control a given parameter of a selected mode
character ("x")
