Accepting this message
dFl
by pressing the „enter” key restores default settings. It is also
possible to exit this menu without returning to default settings by pressing the „escape” button.
PX184 default settings are as follows:
!
driver operating mode – RGB (3b - 3-byte)
!
DMX address – 1
!
no signal operating mode – programme 1,
!
master mode – disabled,
!
number of outgoing DMX channels – 128,
!
White Balance – off,
!
smoothing function – off.
ENTER
POWER ON
ESCAPE
The device is equipped with a built-in memory work control function.
If there are problems with the memory operation, on the PX184 display the
Err
message appears
Err
- memory error.
In this situation, select the
enter
button. The device will reload the default configuration and
upload it to the memory. If after this operation, the
Err
message remains on the screen, the
memory is permanently damaged and the unit must be sent to the service point.
18
PREVIOUSPRESSED
Err message - memory error
158
130
23,4
