In the most applications a one of the first two solutions are used or the
user is allowed to select the one of the options with appropriate software.
Due to the lack of compliance with the DMX-512 standard of multiple devices
available on the market below options allow to select appropriate parameters
of the output DMX signal to a specific device. If you experience any problems,
we recommend using bigger lengths of Break Time, MAB, MBF and packet
gap.
1. Break Time allows to change the length of the interval between successive
DMX packets. Break signal may take longer, but can not be less than 88
microseconds.
Usually it lasts about 120 – 140 microseconds.
At the top of the screen
next to the option name
are visible important
information that simplify
setting an appropriate
value.
Remember to save
values using floppy disc
button
and confirm
with
enter
22
