7.1.1 Ballasts settings
The
Ballast settings
menu is the first available option. It allows to change
all the major features for available ballasts. When selected, and after pressing
enter
button, the device checks the communication with DALI ballasts visible
on the protocol and reads the available ballasts information.
In the vent of lack of power supply on the DALI line on the screen appears
Bus Error
message.
After reading the parameters on the screen is show picture visible above.
All ballasts
option allows to change the settings for all devices visible on
the DALI line.
Consecutive found ballasts are marked with lighting bulbs symbols that
are visible next to the number of ballast. The ballast marked with with a
question mark sign are not found by the PX255. The device supports up to 64
ballasts (according to DALI protocol specification). Only in recognized ballasts
user can change parameters. To do this, select the ballast using or
buttons, then confirm choice by pressing
enter
.
10
