•
DALI>>>DMX – device work in the signal processing from the DALI to
DMX-512 protocol mode
When the PX255 is working in mode DALI to DMX-512 signal conversion it
simulates the work of ballast (virtual ballast) allowing to any DALI controller
identification of devices on the DALI line, thus sending messages to the
busbar.
In the case of working mode DMX-512 to DALI the PX255 transmits the
processed DMX signal directly to the DALI protocol.
6
Main menu
At the bottom of the
Summary screen
a menu screen button is placed.
Once approved, with the enter button, the user is transferred to the Main menu
screen. This menu allows to configure all of devices’ parameters according to
user needs. The following picture shows the list of available options.
To select one of them use or buttons and then choose an option and
confirm the selection by pressing enter.
8
