1. GENERAL DESCRIPTION
3
2. SAFETY CONDITIONS
PX015 Club 6p controller is a device powered with safe voltage 9 - 12 V; however, during its
installation and use the following rules must be strictly observed:
1. The device may only be connected to 9 - 12 V AC / DC with current-carrying capacity
compatible with technical data.
2. All the conductors should be protected against mechanical and thermal damage.
3. In the event of damaging any conductor, it should be replaced with a conductor of the same
technical parameters.
4. Connection of DMX signal can be made with shielded conductor only.
5. All repairs and connections of outputs or DMX signal can be made with cut off power supply
only.
6. PX015 should be strictly protected against contact with water and other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be turned on in places with humidity exceeding 90%.
o
o
9. The device cannot be used in places with temperature lower than 2 C or higher than 40 C.
10. Clean with damp duster only.
Club 6p is a 6-channel, programmable lighting controller, each channel can be controlled
separately. It has an all-channels sum slider of highest priority and flash buttons, that light the
selected channel up with full brightness.
Built-in memory allows to define 6 scenes or 6 chasers.
The controller has also the chasers' rendering speed adjustment feature. Built-in microphone
allow to synchronize chasers' rendering to the music rhythm.
The Club 6p controller is manufactured in a stable, slightly declivous desktop type casing of small
dimensions.
