3 s
K6
K6
K6
8. SCENES AND CHASERS RENDERING
7.3. X-Fade PROGRAMMING
(devices with serial number starting from 040301)
The current rendering mode is
indicated with the LED over the button
no. 6, for about 1 second after the
controller is switched on:
- LED off - jumping rendering
- LED lit - smooth rendering
K6
K6
Memory
K1-6
Chaser
K8
Chaser
Chaser
K7
K7
Chaser
K7
K1-6
K1-6
>10%
8
The controller allows to select, if the step-to-step switch during chasers rendering should be
immediate (jumping rendering) or smoothly faded (X-fade option).
To turn the X-fade feature on or off:
1. Switch the controller off.
2. While holding the K6 button pressed switch the controller on.
3. After approximately 3 seconds release the K6 button.
Scenes and chasers rendering is possible in the
programmable operation mode only. To launch
scene or chaser, simply move the slider, where the
selected scene or chaser is ascribed to. The
brightness of scene or chaser depends on the
moved slider and MASTER slider adjustments.
