PVA PC200 Series, Owner'S Manual

Page: 56 / 56

PC200 PVA
Revision G (2019)
56 of 56
Figure 40: Assemble the Separation Block, Fluid Body and Seal Plate ............................. 26
Figure 41: Align the O-rings .............................................................................................. 27
Figure 42: Air Cylinder Openings Aligned with the Assembly ........................................... 27
Figure 43: Air Cylinder and Fluid Assembly ...................................................................... 27
Figure 44: Apply Grease to the Cylinder Wall ................................................................... 27
Figure 45: Apply Grease to the O-ring .............................................................................. 28
Figure 46: Piston-Rod Assembly ....................................................................................... 28
Figure 47: Install Piston ..................................................................................................... 28
Figure 48: Use a Press to Install the Piston-Rod Assembly ............................................... 29
Figure 49: Piston Fully Engaged in Valve Assembly .......................................................... 29
Figure 50: Apply Grease to Air Cylinder Groove ............................................................... 30
Figure 51: Apply Grease to O-ring ..................................................................................... 30
Figure 52: Tighten Stroke Adjustment Screw ................................................................... 30
Figure 53: Sealing Washer ................................................................................................ 31
Figure 54: Jam Nut ............................................................................................................ 31
Figure 55: Cylinder Cap Installed on the Valve ................................................................. 31
Figure 56: O-rings in the Fluid Manifold ........................................................................... 32
Figure 57: Fluid Manifold Aligned with Valve ................................................................... 32
Figure 58: Assembled Valve .............................................................................................. 32
Figure 59: Mechanical Drawings PC200R.......................................................................... 37
Figure 60: PC200R Exploded View .................................................................................... 38
Figure 61: Mechanical Drawing PC200RW........................................................................ 42
Figure 62: Exploded View PC200RW ................................................................................. 42
Figure 63: Part Number Configuration ............................................................................. 43
Figure 64: Accessories and Options .................................................................................. 45