PC200 PVA
Revision G (2019)
28 of 56
Figure 45: Apply Grease to the O-ring
Figure 46: Piston-Rod Assembly
24.
Carefully install the piston-rod assembly into air cylinder opening.
25.
Push the piston-rod assembly straight down through separation block, slowly,
with pressure that stays the same, until resistance is met (position as shown
below).
Figure 47: Install Piston
To fully engage the piston-rod assembly you can use a press or do it by hand.
•
To use a press continue to step 26.
•
To engage the piston-rod assembly by hand, continue to step 28.
With a Press
26.
Put the valve on the press with the piston up.
Summary of Contents for PC200 Series
Page 41: ...PC200 PVA Revision G 2019 41 of 56 PC200RW Series Mechanical Drawings ...
Page 43: ...PC200 PVA Revision G 2019 43 of 56 How to Order Figure 63 Part Number Configuration ...
Page 45: ...PC200 PVA Revision G 2019 45 of 56 Figure 64 Accessories and Options ...
