DeltaTherm IR Cure Module
Revision B
/
February 2020
Page 25 of 41
3.
The
Actual Temperature
displays the current actual temperature of the heater
panel.
•
On double-sided ovens, the upper and lower panels for each section are
controlled as one zone. The display temperature is the average temperature
(display temperature is filtered) of the upper and lower panel.
Note: With two-sided IR ovens, the upper panels may indicate temperatures higher
than the setpoint due to absorption of energy from the lower panels. This is normal.
4.
The
Max
Deviation
is the max allowable deviation from the target setpoint for the
specified zone and heater panel. Each enabled zone’s panels must reach and
maintain a temperature within the set deviations to run the product in Auto Cycle.
•
Touch the Max Deviation box and a keypad will be shown.
•
Enter the desired value.
•
Press “
ENT
” to save the value and close the keyboard.
5.
The
Apply to All
button will copy the setpoints and deviations of the Zone 1 upper
and lower panels to all over zones.
Note: Zone enable/disable options will not be copied over.
6.
The name of the current
Recipe
will display. Any changes made to the recipe field
values will automatically be saved to the current recipe. Recipes are configured in
OEM mode.