DeltaTherm IR Cure Module
Revision B
/
February 2020
Page 40 of 41
Appendix A – Definitions
Auto Cycle
– Machine state where cycles are running. Mutually exclusive with Manual and
Setup.
Cycle Stop
– Machine state where no action is occurring and the machine is at the standby
position. (“Machine ready for operation”).
Depress
– Press and hold for the duration of the operation.
IR
– Infrared. Type of radiation emitted by the cure module and used to cure materials.
Light Tower
– The light tower consists of three stacked lights, red, amber and green (top
to bottom). It is used to indicate the status of the machine.
Manual
– Machine state that permits the operator to control all the operations of the
machine. Mutually exclusive with Auto Cycle and Setup.
OIT
– Operator Interface Terminal. Screen and/or keys used to control the machine.
PIP
– Part-in-place sensor. Designation for the sensors that sense parts. Numbered
incrementally along the process flow.
Press
– Press and release.
PLC
– Programmable Logic Controller. Type of controller used to program industrial
machinery. See also SLC.
PVA
–Precision Valve & Automation, Inc.
Setup
– Machine state where the Auto Cycle parameters are determined. Mutually
exclusive with Auto Cycle and Manual.
SLC
– Small Logic Controller. Type of controller used to program industrial machinery. See
also PLC.
