PV-ezRack PostMount 3-A Code-Compliant Planning And Installation Manual Download Page 16

Page: 16 / 17

Installation Guide / PostMount 3-A for XL Panels

Code-Compliant Planning and Installation Guide V 1.1 - Complying with AS/NZS1170.2-2011 ADMT 4-2016

- Certification -

REF: CL-10128-S

Internal REF: 00141

8. Footing depths are for reference only. The characteristics of the soil must be checked

on site by a technical expert. A soil report assessment is always recommended and
Clenergy must be informed on the outcome of the soil report.

Construction is to be carried out strictly on accordance with the instruction manual. This work
was designed in accordance with the provisions of Australian Building Regulations and in
accordance with sound, widely accepted engineering principles.

Should you have any queries, do not hesitate to contact us.

Best Regards,

Alberto Escobar

Civil/Structural Engineer

BEng MIEAust NER

BRP EC 46542

RPEQ 18759

[email protected]

Summary of Contents for PostMount 3-A


















Search results

Summary of Contents for PostMount 3-A

Reviews:

Related manuals for PostMount 3-A

Brands by name

Popular brands

PV-ezRack PostMount 3-A, Code-Compliant Planning And Installation Manual

Search results

Summary of Contents for PostMount 3-A

Reviews:

Related manuals for PostMount 3-A

Brands by name

Popular brands