SWITCHING THE DIRECTION OF
ROTATION
• Direction of rotation counter-clockwise: shift
switch (D) to “L”.
• Direction of rotation clockwise: shift switch (D) to
“R”.
SWITCH FOR PERCUSSION DRILLING
Fig.E
• Slide the switch to the “Drill” symbol for normal
drilling.
• Slide the switch to the “Hammer” symbol for
percussion drilling.
MALFUNCTION
Below we have listed a number of possible causes and
corresponding solutions in case the machine does not
function as it should:
1. Excessive sparkling
• This usely indicates dirt in the motor or worndown
carbon brushes.
-
Bring your percussion drill to your Push-dealer.
2. The percussion drill is overheating
• The ventilationslots are covered with dirt.
-
Clean them with a dry cloth.
• The percussion drill is overloaded.
-
Use the machine for work for which it is ment to be.
-
Replace the drill for a sharp one or sharpen the drill by
using a benchgrinder and a twist drill grinding
attachment.
• The motor is defect.
-
Bring your percussion drill to your Push-dealer for
repairance.
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
The Push machines have been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots free
from dust and dirt.
If the dirt does not come off use a soft cloth moistened
with soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please
contact your local Push dealer.
In the back of this manual you find an exploded view
showing the parts that can be ordered.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations.
Take your unwanted machines to your local Push-
dealer. Here they will be disposed of in an
environmentally safe way.
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN50144-1, EN50144-2-1, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37/EEC
73/23/EEC
89/336/EEC
from 01-05-2003
GENEMUIDEN NL
W. Kamphof
Quality department
CE
ı
DECLARATION OF CONFORMITY
(UK)
Push
5
.
Push
.
!.
" ! #
! ,
! . "
!
#.
$ # ,
# .
% #,
, .. &
## .
! .
!"
$ ' ## .. !
,
Push.
(
,
.
#$%&'
% ##
,
! .
!.
)'
.
*
Push. $ , ! !
#.
$((
&
.
+ !,
-
.
EN50144-1, EN50144-2-1, EN55014-1,
EN55014-2, EN61000-3-2, EN61000-3-3
.
98/37/E
73/23/E
89/336/E
01-05-2003
GENEMUIDEN NL
W. Kamphof
CE
ı
)* &%'&
(GR)
56
Push