PURSUIT 3400 Express Fisherman, Owner'S Manual

Page: 96 / 162

windshield, with the special wrench provided. Turn
counterclockwise until loose and remove.
3. Insert the pump out hose into the opening.
4. Remove all waste from the holding tank.
5. Fill the tank with clean water and pump out again.
6. Replace the cap and tighten.
7. Open the flushing valve on top of the holding tank (near
the level sender) and flush the sender for five (5)
seconds. Close the valve.
Note: The Y-valve handle position must be checked carefully.
The direction of flow is printed in the face of the valve and may
not be the same as indicated by the handle.
Note: If your boat is equipped with the optional overboard
pump out you must first check the local regulations to see if this
practice is allowed.
Rev. A 05/02/99
Holding
Tank
Holding Tank
Vent
Dockside
Pump-out
Vacuum Pump
Vacuum Tank
Head
P
Figure 6-7 : Standard Head System
HEAD SYSTEM ROUTINE MAINTENANCE
6-16 3400 Express Fisherman