PURSUIT 3400 Express Fisherman, Owner'S Manual

Page: 50 / 162

4. Estimate how much fuel is needed.
5. Using the special key provided for this purpose, insert
the key into the slot in the fuel fill, turn the key
counterclockwise, and remove the cap.
BE SURE THAT THE FUEL FILL IS IN CONTACT WITH
THE FUEL NOZZLE TO PREVENT ANY STATIC
SPARKS DURING THE FUELING OPERATION.
To prevent damage to your fuel system, use only a
good grade of fuel as recommended by the engine
manufacturer. Do not use a fuel which contains harsh
additives or alcohol. Damage done to your fuel
system as a result of using these fuels will not be
covered by your warranty.
6. Insert the fuel nozzle into the fuel fill and dispense the
fuel until the tank is full. Verify that the tank is full by
reading the fuel gauge and/or by the sound of the fuel
fill port. If your tank takes significantly more fuel than
expected, investigate the cause immediately.
Be careful to not spill any fuel on the boat. If you do,
be sure to clean up any spilled fuel immediately with
a disposable cloth.
Be careful not to spill any fuel outside the boat into
the water. If you do, clean up the fuel immediately in
the manner prescribed by your local regulations.
7. Remove the nozzle and replace the fuel fill cap. Tighten
securely with the provided key.
8. Open all ports, hatches and doors.
Rev. A 05/02/99
CAUTION
WARNING
CAUTION
CAUTION
OPERATING YOUR BOAT WHEN ARRIVING AT YOUR BOAT
3400 Express Fisherman 3-3