PURSUIT 2870 Walkaround, Owner'S Manual

Page: 19 / 140

2870 WALKAROUND
Chapter 1:
PROPULSION SYSTEM
1.1 General
The Pursuit 2870 Walkaround is designed to be powered with twin 2 cycle outboard motors. Most
outboard motors use an oil injection system. Oil is automatically injected in the engines and mixed
at the proper ratio from two oil tanks located in the bilge.
Note: Always monitor the oil level in the tanks and only use the type of oil specified by the
engine manufacturer.
Each manufacturer of the various outboard motors provides an owner’s information manual with
its product. It is important that you read the manual(s) very carefully and become familiar with the
proper care and operation of the engine and drive system. A warranty registration card has been
furnished with each new engine and can be located in the engine owner’s manual. All information
requested on this card should be filled out completely by the dealer and purchaser and then returned
to the respective engine manufacturer as soon as possible.
DO NOT ATTEMPT TO SERVICE ANY ENGINE OR DRIVE COMPONENT WITHOUT BEING
TOTALLY FAMILIAR WITH THE SAFE AND PROPER SERVICE PROCEDURES. CERTAIN
MOVING PARTS ARE EXPOSED AND CAN BE DANGEROUS TO SOMEONE UNFAMILIAR
WITH THE OPERATION AND FUNCTION OF THE EQUIPMENT.
2870 Walkaround
1-1