Purkay Labs Audit-Buddy, User Manual

Page: 32 / 65

USER MANUAL
32
Once the PC settings are changed, you must “add” each WIFI-MODULE to WI-
FI-MATE.
Steps:
1. Start WIFI-MATE program
2. Press screwdriver icon to change configuration.
3. Make sure that TH1 Wi-Fi Adapters are aligned careful. (Rod 1 Top =
Adapter 1, Rod 2 Middle = Adapter 2)
4. Press the white button on Adapter 1
• You may get a screen from Windows Firewall Message.
5. Wait for green LED to flash on WI-FI adapter
6. Repeat Process for the remaining modules
7. Purkay Labs recommends setting up the Modules to Stand before opening WI-
FI-MATE
8. Press the Right Hand arrow when all adapters have been added
TIP : Users may get a “Firewall” message after adding the first module. Press “Al-
low Access.” Press “White button” again. The green light on the TH1 Module will
flash and you will hear a noise.
ADD WIFI MODULES
FOR STATIC IP CONFIGURATION ONLY