PureLink by Dtrovision
60
(S) 3.5mm stereo Audio refers to inserted Audio from Output Board's 3.5mm stereo
jack
Example:
Command Codes
Action
*255OSALLM!
Set all CATx/Fiber Output Audio selection to embedded
*255OSO01A,O02M,O03S!
Set CATx/Fiber Output Audio on Output 1 (Auto), Output 2
(embedded), and Output 3 (3.5mm stereo Audio)
*255OSO01-09M!
Set CATx/Fiber Output Audio on Output 1~9 embedded
OT: Output Test Pattern Select
The "OT" is an initiation command for Output test pattern selection. The characters
and numbers that follow the "OT" command tell the system, send test pattern to which
Output. The last character “!” is found at the end of a command code which tells the
system to execute the command.
For test pattern command, Output #(s), resolution, and pattern type selection are
required
For example, the command code
*255OTO01T02P04!
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255
(OT) Output test pattern on (O01) Output 01 at (T02) resolution 1920 x 1200 and
(P04) 256 Gray pattern (!) take the command. For a complete list of command
characters and their functions, see examples below.
Resolution
Table
Pattern
Type
Table
-
T00:
Test
pattern
disable
-P00:
Test
pattern
disable
-
T01: 1024
x
768 -
P01: Color
bars
-
T02: 1920
x
1200
-
P02: Cross
Hatch
-
T03: 720
x
480P -
P03: 16
Gray
-
T04: 1280
x
720P
-
P04: 256
Gray
-
T05: 1920
x
1080P -
P05: 4Color
Gray
Example:
Command Codes
Action
*255OTALLT01P01!
Set all Output to 1024x768 and color bars test pattern
*255OTO01,O02,O03T02P04!
Set Output 1,2 and 3 to 720x480p and 256 gray test Pattern
