PureLink by Dtrovision
40
4. LAN
- PM series Matrix Router can be controlled through the 10/100 base Ethernet port
using a command line interface.
There are four values that need to be set for LAN communication; IP address,
Gateway address, Subnet mast, and Mac address. Please use below button
indication to configure LAN settings;
* Input #1 : 1
* Input #2 : 2
* Input #3 : 3
* Input #4 : 4
* Input #5 : 5
* Input #6 : 6
* Input #7 : 7
* Input #8 : 8
* Output #1 : 9
* Output #2 : 0
* Output #3 : .
Please use Output #3 button to mover cursor to the next data section
Please use Enter button to save the setting
Note) Please contact your Network Administrator for network information to
avoid any IP conflict.
Factory default settings for LAN communication are:
IP Address: 192.168.000.002
Gateway Address: 192.168.000.001
Subnet Mask: 255.255.255.000
Mac Address: Matrix Router has its own MAC address and that MAC
address allows user to communicate with PC network solutions
without any communication conflict.
5. Input Configuration
1) Input Video Select
2) Input Audio Select
