PureLink by Dtrovision
5
1.2 Product Introduction
The PM series Matrix Router is a Cross-Platform Matrix Router that supports multiple
different digital interface types in a single unit. PureLink's unique "Cross-Platform" feature
makes the Matrix Router most flexible and simple solution for today's sophisticated digital
AV environment.
The PM series Matrix Router supports seven types of digital interface:
HDMI v1.4 (w/optional scaling)
DVI 1.0 (w/optional scaling)
3G/HD-SDI (standard scaling)
Analog VGA/Component
CATx (HDbaseT) (w/optional scaling)
Fiber Optic (w/optional scaling)
Displayport
Each Matrix Router is assembled from field installable I/O (Input/Output) Boards.
The PM-8X Matrix Router can support up to 2 I/O Boards of any of the above type.
The Matrix Router can switch any Input signal to any combination of Outputs. For example,
HDMI Input signal can be Output to 3G/HD-SDI Output, Fiber Optic Output, and CATx
Output. The Matrix Router can route multiple Input/Output configurations simultaneously.
Note)
3G/HD-SDI is not a licensed HDCP interface and if the content received from
HDMI is protected by HDCP, there should be no Output from the 3G/HD-SDI
Board.
PM series CATx I/O Boards are used in conjunction with PM CATx Transmitter and
Receiver and PM series Fiber Optic I/O Boards are used in conjunction with PM Fiber
Transmitter and Receiver.
Note)
For I/O Boards and Extenders compatibility information, see page 32
1.3 Front View:
The PM Matrix Router frame is mountable on a 19'' standard rack. Push button control panel
and power switch are placed at the front panel as show in Figure 1-1
