Action:
There are currently three buttons available in ComposerPro for this driver:
l
Reboot System: Restarts the system immediately, doing so will interrupt video routing briefly
l
Discover System: Used to automatically discover the Device IP Address of the system where possible
l
Send Monitoring Pulse: Trigger an immediate monitoring pulse to be sent, returning current system health data
to
CRESTON HOME
Note: This is an example for the neo:8a driver. Use the appropriate driver to control the intended hardware.
Before the Matrix can be configured as a device within Crestron Home, it must be "side loaded" into Crestron Home. To
side-load the Driver you will need to copy the driver package file to your Crestron Home processor, we advise you use
Crestron Toolbox for this process.
Please place the Pulse-Eight Creston Home Driver into the following folder:
Intern-
alFlash\user\ThirdPartyDrivers\Import
Once the driver has been side-loaded it will appear in the Import file as shown below:
