High Performance Commercial Blender
Owner’s Manual
Model: BL-020B
Read and Save These Instructions
Page 1: ...High Performance Commercial Blender Owner s Manual Model BL 020B Read and Save These Instructions ...
Page 2: ...njury and or damage to the blender A rubber scraper may be used but only when the blender is not running 10 CAUTION Blade is sharp Handle carefully Never try to remove blade while container is sitting on the motor base Do not operate with loose or damaged blades To reduce the risk of personal injury never place blade assembly on motor base without the blender container properly attached 11 Always ...
Page 3: ... sound suddenly diminishes the ingredients have been blended enough Over blending will cause turn the ice into water Blending Fruit Vegetable 1 Put fruit or vegetable and little water into the container 2 Set medium speed or high speed 3 Turn on the unit after 4 6 seconds of blending the ingredients should roll smoothly Do not over blend Note 1 Inching switch is mainly for testing or blending spec...
Page 4: ...On all units the built in thermal sensor keeps track of how hot the motor gets and will automatically shut down the motor if it is overheating User should remove the container and wait until the machine cools down This takes about 2 minutes 2 Special Note Please check your operation when the motor is overheated If the machine runs all day or the material is too thick it can easily overheat Specifi...
