EDID HANDSHAKE:
1.
There may be times you will need to perform an EDID Handshake on your Matrix. This is often after a new piece
of equipment has been introduced to your setup or any changes have occurred.
2.
To do an EDID Handshake
3.
Turn off the Matrix and all Sources
4.
Turn on all TV's, make sure these are not set to standby
5.
Wait 45 seconds
6.
Power on Matrix and wait for x3 Green Lights on the front panel
7.
Wait a further 45 seconds
8.
Turn on all sources
FRONT PANEL LED VALUES:
SYSTEM HEALTH LED:
Solid red - Powering on or fault found
Solid green - System healthy
CLOUD LED:
Solid red - Not connected to the cloud
Solid green - Connected to our cloud
NETWORK LED:
Solid red - No network cable connected
Flashing yellow - Discovering IP address
Solid yellow - Have IP but cannot ping router
Flashing green - Cannot reach internet
Solid green - Network healthy
HDBASET LED STATUS
Please refer to the LED status on the HDBaseT port (on either the receiver or video matrix). Most of them should have
two LEDs:
l
The Yellow LED will illuminate when connected to a video link.
l
The Green LED will illuminate when the device is connected to the power supply
